What the rehab budget is in the loan
On a purchase-plus-rehab file the rehab is not advanced at closing. It is held back and released in draws, each one against work that has been completed and verified. That one mechanical fact decides everything else about how your budget is read.
So underwriting is not asking whether your budget is realistic in the ordinary sense. It is asking a narrower question, line by line: is this an improvement to the property that an inspector will be able to stand in front of and confirm. A line that cannot pass that test is not funded, no matter how real the expense is to you.
And because interest accrues only on funds that have actually been drawn, a holdback you never use costs you nothing. A budget that is honest about scope is cheaper than one padded for comfort.
The lines that get trimmed most often
Your own labor and your own profit
A draw reimburses completed work against an invoice from a third party. Your weekends have no invoice, and a management or profit line payable to you or to an entity you control is a transfer, not an improvement. Many programs will fund the materials you install yourself and not the labor.
Contingency as a budget line
Lenders fund scope. A contingency is by definition work that has not been specified, so there is nothing for an inspector to verify. The cushion is expected to sit in your reserves instead — commonly around six months of interest-only payments plus roughly ten percent of the financed construction.
Anything you could carry out the door
Furniture, staging, decor, electronics, tools and equipment you buy rather than rent. Appliances are usually funded when they are built in and part of the finished kitchen, and usually not when they are a line on a receipt from a big-box store with no installation attached.
Work finished before closing
Draws start at closing. Demolition you did while under contract, or a roof replaced to get insurance bound, is generally outside it. Starting early feels like momentum and is one of the most common ways investors spend rehab money they then cannot recover from the loan.
Carrying costs dressed as rehab
Interest, taxes, insurance, utilities, permits in some programs, travel, and the fee you were going to pay yourself for running the job. Carry is handled through the interest reserve and your own reserves. Putting it in the rehab budget does not get it funded, it just gets the line struck.
Scope the appraisal will not credit
Finishes above what closed sales in that market have paid for, square footage with no permit path, and improvements the appraiser treats as neutral. Over-improvement raises your cost without raising after-repair value, and the ARV cap stops moving while the budget keeps growing.
Allowance lines with no detail
Kitchen, twenty-five thousand dollars. An underwriter cannot verify that and an inspector cannot measure progress against it. Lines without quantities, unit costs or a trade attached get trimmed to what is supportable, or the file comes back asking for a real bid.
The same cost counted twice
General contractor overhead and profit on top of per-trade markups that already include it, or a permit fee appearing both in soft costs and inside a trade line. Double-counted money is the easiest thing in a budget to find and the fastest to remove.
The direction nobody expects: what gets added back
A rehab budget can also be read as too thin, and that is worse for your file than being too generous. Underwriting and the appraiser both look at the age and condition of the expensive systems, and a budget that is silent about them reads as a budget that is going to run over.
The usual suspects are the roof, the heating and cooling system, the electrical panel and service, the plumbing supply and waste lines, the water heater, the windows, and anything structural. If the roof is twenty-four years old and your scope does not mention it, the question is not whether it will be replaced during your hold — it is whether it gets replaced with loan money now or your money later.
An omission like that usually produces one of three outcomes: the line gets added and funded, the file gets a condition before the budget is approved, or the leverage comes down because the deal is read as riskier than it was presented. The first of the three is the one you want, and you only get it by putting the item in yourself.
Why a trimmed budget is a smaller loan, not a smaller project
Across our lender panel, fix and flip financing commonly reaches up to 90 percent of the purchase price plus 100 percent of the rehab budget, and up to 75 percent of after-repair value. Those are maximums that vary by lender, by your experience and by the property.
Read the second half of that carefully: 100 percent of the rehab budget means 100 percent of the budget underwriting approved, not the one you submitted. Every line that comes out is a dollar that is no longer part of the loan. The work usually still happens, because the house still needs it. So the cut does not reduce the scope — it moves the funding of that scope from the lender to your bank account, at exactly the moment you were planning your cash to close.
Example scenario: a $95,000 budget approved at $78,000
Illustrative example. Numbers are hypothetical and not from a specific client or loan.
An investor is under contract at $285,000 and submits a rehab budget of $95,000. Underwriting approves $78,000. Four lines came out and one went in.
Out: $9,000 of labor the investor was going to perform himself, a $6,000 contingency line, $3,500 of staging and furniture, and $2,000 of demolition completed before closing. In: $3,500 for a roof the scope never mentioned, which the appraiser flagged as nearing the end of its life. Ninety-five thousand minus $20,500, plus $3,500, is $78,000.
The loan: 90 percent of $285,000 is $256,500 toward the purchase, plus the $78,000 approved holdback, for $334,500. The after-repair value came in at $450,000, so the ARV cap is $337,500 — slightly above, which means the purchase-plus-rehab cap is the binding one.
The cash: $28,500 toward the purchase, plus closing costs and reserves of roughly six months of interest-only payments and about ten percent of the financed construction, which here is $7,800. And then the part that stings. Of the $20,500 trimmed, $14,500 was money still going to be spent — the labor if he hires it out, the staging to sell the house, the demolition already paid for. Only the $6,000 contingency was never a commitment. So the trimming moved about $14,500 from the loan to his pocket, and the roof the lender added is the one line that went the other way.
How to write a budget that survives underwriting
Build it room by room, with quantities and unit costs
Square feet of flooring, number of windows, linear feet of cabinet, and each trade on its own line. Roof, mechanicals, electrical, plumbing and structural always called out separately. A budget an inspector can measure progress against is a budget underwriting can fund.
Get a signed third-party bid on that same scope
A contractor who is not you, holding a current license in the state where the property is, with insurance you can produce. The bid and your budget should describe the same job, because the appraiser is handed the scope too and the two documents get compared.
Put the big-ticket items in, even the ones you hope to avoid
Roof age, panel capacity, the water heater, failing windows. If it is a reasonable question for anyone reading the file, answer it in the budget instead of leaving it to be discovered.
Keep the contingency out of the budget and in your reserves
It does not get funded as a line, and it does get you asked about padding. Show it where it counts in your favor: documented cash after closing.
Do not start work before closing
Nothing recovers money spent outside the approved budget. If something truly cannot wait, raise it before you spend, so it can be addressed in the file rather than argued about afterwards.
Strip out anything that leaves with you
Furniture, staging, tools, equipment you own at the end. Keep them in your own project numbers — they are real costs — and keep them out of the line items you are asking the lender to fund.
Send it before you are under contract
Every one of these corrections is free on a draft and expensive on a file that is already in underwriting with a closing date attached.
If the approved budget comes back short
The arithmetic is not negotiable but the response is. Ask which lines were removed and why: a line struck for missing detail can often be resubmitted with a proper bid, and a line struck because it is not fundable will never come back no matter how it is rewritten. Those are two different problems and they look identical in an email that only says the budget was reduced.
What is left is honest. Fund the gap with your own cash, cut scope so the project matches the approved budget, renegotiate the purchase price, or pass. The deal that hurts investors is the one where the budget was cut by $17,000 and nothing changed except the assumption that it would work out.
How we fit
We are a private money loan broker. We arrange business-purpose real estate financing through a panel of third-party lenders and we are not a lender ourselves. We also run a construction company, which is the reason we ask for the rehab budget before the application rather than after: we read line-item budgets every week from the building side, and we would rather tell you which lines will not survive while the budget is still a draft.
Have a rehab budget in hand?
Send it with the purchase price and we will tell you which lines underwriting will not fund and what the cash to close looks like. Three minutes, no credit pull.
Next steps
Fix and flip programs
What the rehab programs look like, and how the approved holdback is released in draws.
See the termsRun the numbers
Test the deal against the budget you expect to be approved, not the one you submitted.
Open the calculatorGet pre-qualified
An honest range on this specific deal, with no credit pull to get it.
Three minutesOne Bridge Capital arranges business-purpose real estate financing through a panel of third-party lenders and is not a lender. Terms shown are typical ranges, vary by lender, property and borrower profile, and are not a commitment to lend. Loans are for business purposes only and are not available for owner-occupied primary residences.
Frequently asked
Almost always because a line cannot be verified as an improvement to the property after the work is done. The common ones are your own labor, a contingency line, staging and furniture, work completed before closing, carrying costs, and allowance lines with no quantities or trade attached. Ask which lines came out: some can be resubmitted with a line-item bid, and some are simply not fundable.
Generally not the labor. Draws reimburse completed work against third-party invoices, and self-performed labor has no invoice behind it. Several programs will fund the materials you install yourself. If a meaningful part of your budget is your own time, say so early, because it changes the cash you need rather than the scope of the job.
You can submit it and it usually will not be funded, because it describes work that has not been specified. Lenders expect the cushion to sit in your reserves instead — commonly around six months of interest-only payments plus roughly ten percent of the financed construction. Documented cash after closing helps your file; a contingency line does not.
Up to a point. Rehab is commonly funded up to 100 percent of the approved budget, but the loan is also capped at up to 75 percent of after-repair value and up to 90 percent of the purchase price, and underwriting funds the lowest cap. Once the after-repair value cap binds, adding budget raises your cost without raising your loan. These are maximums that vary by lender, experience and property, and are not a commitment to lend.
On most programs no. Draws begin at closing, so demolition or repairs completed while you were under contract generally fall outside it. If something cannot wait — a roof that insurance requires, for example — raise it before you spend rather than after, so it can be handled in the file.
The overage is yours. The holdback is fixed at the approved amount, so extra work is funded out of pocket, which is the real reason reserves are underwritten. Tell us as soon as the trend is visible rather than at the last draw: at month four there are usually options, and at month eleven there are usually not.
It varies by program and by how much experience you have. Some lenders accept an investor acting as their own builder on a light cosmetic scope; most want a third-party contractor holding a current license, with insurance and a signed line-item bid, and nearly all do on anything structural. A contractor with a documented record also tends to help your leverage tier on a first deal.
Three minutes to a straight answer.
No credit pull. No cost. We tell you when it does not work.